Firefighter seat belt with support lanyard compliant with standard EN 358 and attachment with a carabiner
Belt Polyester 85 mm wide, and on the adjustable parts with edges in aluminum material ; holes and
Overlapping slots reinforced with a steel hook

Made up of two D-rings in light aluminum alloy, one of which is positioned laterally and 1 rear center.
The right ring is permanently connected to the positioning of the hook connector.
The rings are fixed to the belt by means of suitable reinforcements with special rivets.
Polyamide rope, twisted three times - leather protection
length 0,8 m
corresponds to standard EN 354.Carabiners :
Type A screwgate carabiner, conforming to EN 362 approvalWeight : 1034 grams